Can 6000mm be used as the tube loading specification?
The number belongs to the sheet Cutting Area entry. Supply the required tube length and request a specific response about the proposed arrangement.
Tube And Sheet Laser Cutting Machine
VIF6015T — VIF-T Laser Cutting Machine
VIF6015T tube application configuration should make the incoming stock and proposed handling responsibilities clear. State the tube length your project requires instead of deriving it from the machine's sheet-area entry. Describe the sheet workload separately, with its own stock dimensions and drawings, so the two application discussions remain connected without being confused.
The VIF-T range is listed for tube and sheet laser cutting. VIF6015T has a published Cutting Area of 6000*1500mm and a 1500-3000W power range. Those are useful equipment references, but they do not define the tube-loading arrangement or the items included in an offer.
Technical specifications
| Specification | VIF6015T |
|---|---|
| Cutting Area | 6000*1500mm |
| Laser Head | Raytools, WSX |
| Laser Power | 1500-3000W |
| Laser Generator | Raycus, MAX, IPG |
| Control System | CypCut, Golden Orange, Weihong |
| Servo Motor And Driver | Luoyuan, Fuji, Delta |
| Guide Rails | Taiwan Linear Rails |
| Reducer | Japan Shinbo, France Mortori |
| Max. Acceleration | 0.8G |
| Max. Linkage Speed | 70m/min |
| Z Axis Travel | 100mm |
| Positioning Accuracy | 0.05mm |
| Repositioning Accuracy | 0.03mm |
Configuration options vary by model. Confirm the final specification, selected components and operating requirements with your quotation.
Other models in this series
VIF6015T tube project brief for stock handling
Begin the VIF6015T tube project brief with section shape, outside dimensions, wall thickness, material and incoming length. Attach finished-part drawings and quantities. Describe where stock will be presented and note the handling arrangements that remain undecided. These are requirements to discuss, not claims that a particular loading system is supplied.
Keep sheet formats in a separate list. VIF6020T is listed with 6000*2000mm Cutting Area, compared with 6000*1500mm for VIF6015T. That comparison preserves the first dimension and changes the second. It can clarify sheet stock requirements without providing a tube length or section limit.
VIF6015T lists 70m/min Max. Linkage Speed, 0.8G maximum acceleration and 100mm Z axis travel. Positioning Accuracy is 0.05mm and Repositioning Accuracy is 0.03mm. None of these entries supplies the loading time or cutting cycle for a tube job; keep the required part dimensions in the drawing set.
VIF6015T machine options and project responsibilities
VIF6015T machine options should be reviewed with a written division of responsibilities. Identify the arrangements you intend to provide and the items you want considered in the equipment offer. Where loading or removal remains unresolved, ask for the proposed approach rather than assuming it follows from the model designation.
Describe the incoming tube stock and the finished components as different parts of the job. A stock length does not describe the features on the part, and a drawing alone may omit how the raw material is supplied. Keep both records attached when the proposed configuration is discussed or revised.
If sheet work is a secondary requirement, still provide its actual formats and drawings. Label future additions separately from the jobs required now. This keeps the combined inquiry usable while avoiding an implied claim that every planned part has already been considered or demonstrated on the machine.
VIF6015T quotation requirements for a defined scope
VIF6015T quotation requirements include the selected power within 1500-3000W. Raytools and WSX are listed heads; Raycus, MAX and IPG are listed generators. The control alternatives are CypCut, Golden Orange and Weihong. Ask the offer to identify the selected combination and the drawing references used to prepare it.
The table lists Luoyuan, Fuji and Delta drives, Taiwan Linear Rails and Japan Shinbo or France Mortori reducers. Compare the chosen components rather than treating every alternative as included. Keep component preferences separate from the application questions that still need an answer.
Request overall equipment dimensions and destination-specific installation information, then record the supplied items and agreed responsibilities in the proposal. The sheet Cutting Area is not a complete footprint. Use the series and comparison-model links for parameter context and send the contact page the stock, drawing and handling requirements together.
Product questions
What should the handling brief explain?
Describe stock presentation, intended part removal and which responsibilities are still open. Ask what the offer includes rather than presuming a loading system is standard.
Why compare VIF6020T with VIF6015T?
Their sheet-area entries are 6000*2000mm and 6000*1500mm. The comparison helps address the second sheet dimension.
Does linkage speed include loading time?
The published 70m/min figure is Max. Linkage Speed. It does not specify the handling or cutting cycle for your work.
Which documents should travel with a revised offer?
Keep the current tube and sheet drawings, stock descriptions, component selections and open responsibility questions together so the basis of the proposal remains clear.
Related equipment and information
Compare VIF-T Laser Cutting Machine models
Ready to discuss VIF6015T?
Share your material, dimensions and process. Start a conversation about the right configuration.