What should be included when the tube job changes?
Identify the revised drawing and changed requirements, with the current section dimensions, material, wall thickness, stock length and quantity.
Tube Laser Cutting Machine
VIT6035 — VIT Laser Cutting Machine
VIT6035 tube application configuration should be based on the current version of the tube job, especially when stock or drawings have changed since the first inquiry. Identify those changes before comparing proposals. This keeps a revised component requirement from being confused with a simple change of equipment brand or power selection.
The VIT6035 model is listed in the VIT tube laser cutting range with a 6000*350mm Cutting Area entry and a 1000-6000W power range. Preserve the area label in the comparison. The actual section geometry and incoming stock length need their own description and response in the proposed arrangement.
Technical specifications
| Specification | VIT6035 |
|---|---|
| Cutting Area | 6000*350mm |
| Laser Head | Raytools, WSX, BOCI, Osprey |
| Laser Power | 1000-6000W |
| Laser Generator | Raycus, MAX, IPG |
| Control System | CypCut, Weihong |
| Servo Motor And Driver | Fuji, Delta, Yaskawa |
| Guide Rails | Taiwan Linear Rails |
| Reducer | Japan Shinbo, France Mortori |
| Max. Acceleration | 0.6G |
Configuration options vary by model. Confirm the final specification, selected components and operating requirements with your quotation.
Other models in this series
VIT6035 tube project brief after stock or drawing changes
A VIT6035 tube project brief should contain the current drawing reference, section shape, dimensions, wall thickness, material and incoming length. Include quantity and state which requirement changed. Retain the unchanged details too, so the supplier can review one complete current job rather than reconstructing it from separate revision notes.
VIT6022 lists Cutting Area as 6000*220mm, compared with 6000*350mm for VIT6035. The difference is in the second published entry. Do not convert it into an unqualified tube-diameter claim or assume it answers a loading question for a section that has not yet been described.
The VIT6035 table lists 0.6G maximum acceleration. That value should remain an equipment parameter in the comparison. It does not establish the cutting speed, cycle time or completed-part dimensions for a revised drawing. Put the required dimensions and tolerances on the drawing for a specific application discussion.
VIT6035 machine options against the current job
VIT6035 machine options should be compared with the application revision visible. If the section is unchanged but the finished features differ, identify the new drawing. If material, wall thickness or stock length changed too, state those differences explicitly rather than treating an earlier response as confirmation of the new work.
Describe any change to stock presentation or part-removal responsibilities separately from the component drawing. Ask which arrangement is proposed and what the offer includes. The model name and Cutting Area field do not define a loading system, an unattended process or the complete equipment package around the job.
Keep new prospective work separate from the currently required components. Add it to the confirmed inquiry only when its stock and drawing details can be supplied for discussion. This avoids presenting an equipment selection as a blanket answer to parts that were not included in the earlier project record.
VIT6035 quotation requirements for revision comparison
VIT6035 quotation requirements include the chosen rating within 1000-6000W and named components. Heads are listed as Raytools, WSX, BOCI and Osprey; generators as Raycus, MAX and IPG; controls as CypCut and Weihong. Record the actual combination offered and distinguish it from an earlier proposal if selections have changed.
The drive alternatives are Fuji, Delta and Yaskawa, with Taiwan Linear Rails and Japan Shinbo or France Mortori reducers. Keep selected items beside the quotation revision. A list containing every alternative is not the same as a definite configuration, and a changed brand should not be confused with a changed application requirement.
Request overall equipment dimensions, destination-specific installation information and the supplied-item scope with the current offer. Keep unresolved tube and handling questions attached. The series and comparison-model links provide source context; use the contact page to submit one consolidated revision record for a specific response.
Product questions
Does 6000*350mm confirm a loading-length limit?
It is the published Cutting Area value. State the actual stock length and section and ask for the proposed arrangement to be addressed.
What differs in the VIT6022 area entry?
VIT6022 lists 6000*220mm and VIT6035 lists 6000*350mm. The original label should remain in the comparison.
How can component and drawing changes be kept separate?
Record the chosen power, head, generator, controls and drives against each quotation revision, then list workpiece changes in the application record.
Does an earlier offer cover later components automatically?
Treat new parts as new requirements with their own drawings and stock descriptions. Do not imply that they were confirmed by a previous equipment discussion.
Related equipment and information
Compare VIT Laser Cutting Machine models
Ready to discuss VIT6035?
Share your material, dimensions and process. Start a conversation about the right configuration.