Why keep separate records for parts using one section?
Their finished features, drawing revisions and quantities may differ. Preserve those requirements rather than relying on a shared stock description.
Tube And Sheet Laser Cutting Machine
VIP4020T — VIP-T Laser Cutting Machine
VIP4020T tube application configuration should give each finished component its own place in the project record. Parts made from the same section may have different features, drawings and quantities. Show those differences, while keeping sheet components in a separate group, so the equipment inquiry describes the work rather than only the raw material.
VIP4020T appears in the VIP-T tube and sheet range with a 4000*2000mm Cutting Area and 1500-20000W power range. The area is useful for the sheet portion of the project. Tube dimensions, incoming length and required part features need their own information and confirmation.
Technical specifications
| Specification | VIP4020T |
|---|---|
| Cutting Area | 4000*2000mm |
| Laser Head | Raytools, WSX, BOCI, Osprey |
| Laser Power | 1500-20000W |
| Laser Generator | Raycus, MAX, IPG |
| Control System | CypCut, Weihong |
| Servo Motor And Driver | Fuji, Delta, Yaskawa |
| Guide Rails | Taiwan Linear Rails |
| Reducer | Japan Shinbo, France Mortori |
| Max. Acceleration | 1.3G |
| Max. Linkage Speed | 140m/min |
| Z Axis Travel | 300mm |
| Positioning Accuracy | 0.05mm |
| Repositioning Accuracy | 0.03mm |
Configuration options vary by model. Confirm the final specification, selected components and operating requirements with your quotation.
Other models in this series
VIP4020T tube project brief with separate feature records
In the VIP4020T tube project brief, connect every drawing to section shape, outside dimensions, wall thickness and material. Add the incoming stock length and the quantity for each part. If two components share a section, preserve both drawing references instead of merging them into one undifferentiated stock requirement.
For sheet components, list the stock format and thickness with the relevant drawing. VIP6015T has a 6000*1500mm Cutting Area entry against VIP4020T's 4000*2000mm. This is not an increase in both dimensions. Check the two entries against the sheet formats rather than ranking models by the first number alone.
VIP4020T lists 1.3G maximum acceleration, 140m/min Max. Linkage Speed and 300mm Z axis travel. Positioning Accuracy is 0.05mm and Repositioning Accuracy is 0.03mm. Keep these equipment labels separate from the part dimensions and tolerances. They do not establish a cutting speed for the submitted material or a verified result for each feature.
VIP4020T machine options for the required components
VIP4020T machine options should be discussed with the most important required parts clearly identified. If a feature is still being redesigned, state that uncertainty and supply the current version. An equipment proposal should not be treated as confirmation of a drawing detail that has not yet been defined.
Ask for the intended tube section and incoming stock to be considered with the finished features. Keep loading and section questions separate from the sheet-area comparison. A combined tube and sheet category does not supply the missing tube limits or demonstrate a particular part geometry.
Separate essential current parts from occasional or prospective work. Describe the actual requirements in each group rather than treating them as interchangeable applications. This lets a proposal identify what it is addressing and keeps later additions from silently expanding the scope of the initial discussion.
VIP4020T quotation requirements and drawing references
VIP4020T quotation requirements should name the selected power and components. The published head alternatives are Raytools, WSX, BOCI and Osprey; generator alternatives are Raycus, MAX and IPG; controls are CypCut and Weihong. Ask which combination is offered for the drawing set and project scope supplied.
The table lists Fuji, Delta and Yaskawa drives, Taiwan Linear Rails and Japan Shinbo or France Mortori reducers. Identify the selected items and keep any buyer preferences visible as requests until confirmed. Several alternatives in a row do not mean several complete configurations are included in the same offer.
Request overall equipment dimensions and installation information for the destination, with a supplied-item list and unresolved application questions. The Cutting Area entry alone is not an equipment footprint. Use the linked series and comparison model to review the published choices, then send the contact page the complete component and drawing list.
Product questions
Is VIP6015T larger in both sheet-area dimensions?
No. It lists 6000*1500mm while VIP4020T lists 4000*2000mm. Compare each dimension with the intended stock.
How should a feature still under design be described?
Mark it as provisional and provide the current drawing. Keep the unresolved requirement open rather than implying it has been confirmed by the equipment selection.
Does the area table define a tube loading arrangement?
It does not. Give the actual section and incoming length and ask for a response to that tube application.
What should be stated in the equipment proposal?
Identify the selected power, head, generator, controls and drives, together with included items and the drawing set the proposal addresses.
Related equipment and information
Compare VIP-T Laser Cutting Machine models
Ready to discuss VIP4020T?
Share your material, dimensions and process. Start a conversation about the right configuration.