What belongs in the first VIT-A6022 inquiry?
Include section shape, dimensions, wall thickness, material, stock length, drawing revision and quantity. Identify any details that remain provisional.
Tube Laser Cutting Machine
VIT-A6022 — VIT-A Laser Cutting Machine
VIT-A6022 tube application configuration begins with a defined section and a drawing of the finished component. Describe what you need to cut before selecting an equipment combination. A model number and a short stock description cannot identify every feature, dimension or handling requirement in the intended tube project.
VIT-A6022 is a listed model in the VIT-A tube laser cutting range. Its source table gives Cutting Area as 6000*220mm and laser power as 1000-6000W. Keep the original area label when comparing equipment, and ask for the actual section and incoming length to be addressed explicitly.
Technical specifications
| Specification | VIT-A6022 |
|---|---|
| Cutting Area | 6000*220mm |
| Laser Head | Raytools, WSX, BOCI, Osprey |
| Laser Power | 1000-6000W |
| Laser Generator | Raycus, MAX, IPG |
| Control System | CypCut, Weihong |
| Servo Motor And Driver | Fuji, Delta, Yaskawa |
| Guide Rails | Taiwan Linear Rails |
| Reducer | Japan Shinbo, France Mortori |
| Max. Acceleration | 0.6G |
| Positioning Accuracy | 0.05mm |
| Repositioning Accuracy | 0.03mm |
Configuration options vary by model. Confirm the final specification, selected components and operating requirements with your quotation.
Other models in this series
VIT-A6022 tube project brief with section details
The VIT-A6022 tube project brief should give the section shape, outside dimensions, wall thickness and material grade. Include stock length, drawing revision and quantity. Where the drawing is unfinished or the stock specification is provisional, identify the missing details so the first response does not depend on hidden assumptions.
VIT-A6035 is the adjacent listed model, with a 6000*350mm Cutting Area entry compared with 6000*220mm for VIT-A6022. This establishes a difference in the published field. It should not be renamed as a universal tube-diameter or stock-loading limit without a specific response about the intended section.
The VIT-A6022 column lists 0.6G maximum acceleration, 0.05mm Positioning Accuracy and 0.03mm Repositioning Accuracy. Use those values under their published labels. Finished-part tolerances belong on the drawing, and these parameters do not establish a cutting cycle or a guaranteed result for the part you submit.
VIT-A6022 machine options for the first defined job
VIT-A6022 machine options should be considered with the intended features and stock presentation in view. Describe how the raw material will arrive and identify any loading or removal questions that need an answer. The A in the model name should not be used as a substitute for a confirmed equipment or handling description.
If the project contains several tube components, identify one essential starting job and list the others separately. Supply a drawing and stock record for each. Mark future ideas as prospective requirements so they do not become assumed applications simply because they were mentioned during an initial inquiry.
Separate application questions from preferred brands. A chosen control or laser source does not remove the need to describe section dimensions and required features. Keep unanswered questions about the proposed arrangement visible even after the equipment options begin to take shape.
VIT-A6022 quotation requirements and included equipment
VIT-A6022 quotation requirements should name a selected power within 1000-6000W. The table lists Raytools, WSX, BOCI and Osprey heads; Raycus, MAX and IPG generators; and CypCut or Weihong controls. Ask the quotation to identify the particular combination offered against the current drawing and stock details.
Fuji, Delta and Yaskawa are listed drive alternatives, with Taiwan Linear Rails and Japan Shinbo or France Mortori reducers. Record any preferences as requests and confirm which items are supplied. The full set of names in a source row is not a description of several components included together.
Provide the destination and request the overall equipment dimensions, installation information and supplied-item scope for the proposed arrangement. The Cutting Area field alone does not supply a layout. Use the series and adjacent-model links for context, then send the contact page the complete brief and remaining questions.
Product questions
Can 220mm be stated as a universal tube diameter?
The table labels the value within Cutting Area. Ask for the actual section and dimensions to be addressed rather than converting the field into an unqualified diameter limit.
How does the VIT-A6035 field differ?
It lists Cutting Area as 6000*350mm, while VIT-A6022 lists 6000*220mm. Keep the original label in the comparison.
Does the A suffix establish automatic loading?
A suffix alone does not define supplied handling equipment. Ask the proposed arrangement and included items to be described explicitly.
What should be definite in the component proposal?
The selected power, head, generator, control and drives should be named, with the applicable drawing and stock requirements attached.
Related equipment and information
Compare VIT-A Laser Cutting Machine models
Ready to discuss VIT-A6022?
Share your material, dimensions and process. Start a conversation about the right configuration.