What should the first VIT-F35 brief include?
Give section dimensions, wall thickness, material, incoming length, quantity and a current finished-part drawing, with provisional details clearly identified.
Tube Laser Cutting Machine
VIT-F35 — VIT-F Laser Cutting Machine
VIT-F35 tube application configuration begins with the section and finished part you intend to submit for review. Describe the raw stock separately from the drawing features, then identify the installation information still needed. The published parameters are useful references, but they do not replace an application record for the actual tube job.
VIT-F35 is listed in the VIT-F tube laser cutting range. Its Working Area entry is 12000*350mm, with a 12-20kW laser power range and FSCUT control. Preserve the Working Area label rather than converting it directly into a universal tube diameter or incoming-stock limit.
Technical specifications
| Specification | VIT-F35 |
|---|---|
| Working Area | 12000*350mm |
| Positioning Accuracy | ±0.05 mm |
| Repositioning Accuracy | ±0.02 mm |
| Max Moving Speed | 100 m/min |
| Laser Source | Max/IPG |
| Laser Power | 12-20kw |
| Control System | FSCUT |
| Machine Size | 11800*2280*2600mm |
| Product Weight | 5000-20000kg |
| Max Acceleration | 0.6-1.2G |
| Voltage | 220V 1P 50HZ /380V 3P 50HZ |
Configuration options vary by model. Confirm the final specification, selected components and operating requirements with your quotation.
Other models in this series
VIT-F35 tube project brief and original parameter labels
The first VIT-F35 tube project brief should contain section shape, dimensions, wall thickness, material grade, incoming length and quantity. Attach the current finished-part drawing. If a dimension or stock choice is provisional, identify it so the proposal does not appear to confirm information that has not yet been settled.
VIT-F52 lists Working Area as 12000*520mm compared with 12000*350mm for VIT-F35. The second entry differs. Ask how the proposed equipment arrangement addresses the actual section and stock requirements instead of treating that difference as a confirmed loading or clamping specification.
The table gives Positioning Accuracy as ±0.05mm and Repositioning Accuracy as ±0.02mm. Max Moving Speed is 100m/min and Max Acceleration is 0.6-1.2G. Keep the field names and signs: moving speed is not material cutting speed, and the accuracy entries do not by themselves guarantee a finished-part result.
VIT-F35 machine options for stock and layout planning
VIT-F35 machine options should be discussed with the intended stock presentation and required finished features in view. Identify handling questions and the work you expect to provide around the machine. Request a response to those requirements without assuming that a particular loading system or complete production line is included.
For a project with several sections, start with the essential current parts and give each a drawing reference. Label later ideas separately. A selected power rating or model does not establish that every possible material, wall thickness or future component has been confirmed for the proposed arrangement.
Use the layout discussion to resolve information that the parameter table leaves broad. Machine Size is listed as 11800*2280*2600mm, while Product Weight is 5000-20000kg. Request the exact dimensions and weight for the offered configuration. Product Weight is an equipment-weight field, not the allowable weight of tube stock.
VIT-F35 quotation requirements for power and installation
VIT-F35 quotation requirements should name the selected rating within 12-20kW and the chosen Max or IPG laser source. FSCUT is the listed control. Keep those selections beside the drawing revision and application record, distinguishing what has been offered from an option still under discussion.
The Voltage row lists 220V 1P 50HZ and 380V 3P 50HZ alternatives. State the destination supply and ask which electrical configuration is offered. The two entries should not be read as automatic compatibility with both supplies, nor as a substitute for the installation requirements of the selected equipment.
Request a supplied-item list, overall layout and installation information with the quotation. Keep the section, stock and unresolved handling questions attached. The series and comparison-model links support the published field review; the contact page can carry the complete first submission for a specific configuration response.
Product questions
Does 350mm define a universal tube diameter?
The published label is Working Area. Ask for the intended section and stock arrangement to be addressed rather than converting the value into an unqualified diameter limit.
What differs in the VIT-F52 comparison?
The Working Area entry changes from 12000*350mm to 12000*520mm. Keep the field label and confirm its application to the actual project.
Is Product Weight the tube payload?
No. It is an equipment-weight field listed as 5000-20000kg. Request the exact weight of the offered configuration and discuss stock-handling requirements separately.
Does the table establish operation on both listed supplies?
It lists two voltage alternatives. Provide the destination electrical supply and confirm the configuration offered for it.
Related equipment and information
Compare VIT-F Laser Cutting Machine models
Ready to discuss VIT-F35?
Share your material, dimensions and process. Start a conversation about the right configuration.